 |
 |
|
|
| |
| CPM-700
[Countersurveillance Probe/Monitor] |
| |
| The CPM-700 is a broadband receiver designed
to detect and locate all major types of electronic surveillance devices
including room, phone, body bugs, video transmitters, and tape
recorders.
Broadband receivers such as the CPM-700 provide a very important
cost-effective tool for professional sweep teams, government security
personnel, and private citizens with important security needs.
The CPM-700 is very effective for rapidly detecting and locating
transmitted signals, while being very easy to learn to use. The CPM-700
sweep kit includes a custom Cordura case that contains all items
necessary to conduct a professional sweep.
|
 |
There are several
"imitations" of the CPM-700 on the market because of it's
success as a product. While some of these copies may be cheaper, they do
not provide the frequency performance and sensitivity of the CPM-700. We
guarantee it!
|
| |
| CPM-700
Advantages |
| |
-
Multi-Functional Utility -
Comes with probes to detect RF transmitters (audio and video),
carrier current transmitters, and telephone bugs. Probes also
available to detect for infrared transmitters, tape recorders, and
acoustic leakage.
- Wideband Coverage -
from 200Hz to over 3GHz with no holes or gaps.
- Monitor Mode - after
a sweep, the alarm monitor (silent or audible alert) guards against
new devices brought in or remote control activation of surveillance
devices.
- Auxiliary Audio Input -
allows user to listen to telephones or lines for "hotmikes,"
hookswitch by-pass and "infinity" bugs. Unknown wires and
cables can be tested for wired microphones.
|
| |
| Specifications |
| |
|
R.F. Probe:
- Gain: 20dB nominal Frequency
- Response: 50kHz-2GHz ±3dB 3GHz-10dB
- Sensitivity: -62dBm (1 segment) -85dBm M.D.L.
VLF Probe:
- Frequency Response: 15kHz-1MHz-3dB
- MAX input voltage: 300 VAC 50-60Hz
- Isolation: 1500 VAC 60Hz
- Sensitivity: -38dBm (1 segment) -60 M.D.L.
Audio Amplifier:
- Input Impedance: 50K Ohm balanced
- Input Range: 1.7uV-10V (135dB) AGC
- Dynamic Range: 100dB (high and low gain)
- Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave,
2.5kHz-18dB/octave
Headphone Output: 5Vp-p 220 Ohms
- Record Out: 25 mVp-p nominal with AGC
Display:
- LCD bargraph: 18 segment with pulsing single segment trip point
- 50dB dynamic range (1 segment High Gain to MAX Low Gain)
- Alert Output: 2.8kHz tone or silent red LED at 2Hz
- Remote Output: N.O. contact (300mA 25V MAX)
Battery:
- 8 ea. MN1500 AA Alkaline - Life 10-16 hrs
- (Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge
- Low Battery Indicator: approx. 10% remaining power
AC adpter/Charger:
- Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz
- Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs
CPM-700 Unit:
- Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm
- Weight: 39 oz, 1.1 kg
Carry Case with all standard Items:
- Size: 16 3/8 x 11 1/4 x 3 in, 41.6 x 28.6 x 7.6cm
- Weight: 7 lbs, 3.18 kg
|
| |
| Additional
Products |
| |
| IRP-700
Infrared Probe |
| MLP-700
Magnetic Leakage Probe |
| ALP-700
Acoustic Leakage Probe |
| MPA-700
Modular Phone Adaptor |
| TRP-700
Tape Recorder Patch Cable |
| CLA-700
Cigarette Lighter Adaptor |
| NCB-700
Ni-Cad Battery Pack |
| BMP-1200
Broad Band Microwave Probe |
|