 |
 |
|
|
| |
| OPC-5000
- PC Interface Option |
| |
| The OSCOR PC Interface software provides the opportunity
for your computer to communicate directly with the OSCOR to store signal
database information from the OSCOR in your PC. This allows for later
retrieval and to upload a signal database that was previously created by
an OSCOR.
Using the PC as a permanent storage device for OSCOR information
allows for records of previous sweeps from various locations to be
created, manipulated, and compared. |
 |
| After an accurate signal database is
established for a specific environment, it may be used as a reference
database and will save significant time in performing future sweeps.
Furthermore, the OPC software provides the ability to program and
utilize the OSCOR in new methods above and beyond the original hardware
design of the OSCOR.The OPC Software actually consists of two programs:
(1) OSCOR Communications Interface and (2) OSCOR database Utilities
Program. |
| |
| Features |
| |
- Provides the ability to upload, download, and permanently store a
signal database from the OSCOR.
- New in ver. 4. Now supports multiple database files
opened simultaneously.
- Provides the ability to program the OSCOR for automatic operation
using computer interface.
|
 |
|
- Provides the ability to remotely control the OSCOR via modem over
standard telephone lines. (The OSCOR can be located in remote
facilities and simply polled to download signal information to
determine if any new signals have been brought into the
environment.)
|
 |
|
-
Real-time RF Spectrum Display provides complete control of OSCOR.
Whether compact or full size format, the display shows the actual
information that is on the OSCOR screen. No matter where the OSCOR
may be physically located, this console allows for familiar
operation, using modems to interface the OSCOR and a PC.
|
 |
|
- Comparison of a stored "friendly" RF spectrum with
real-time spectrum to see a rapid indication of a new threat signal.
This allows for faster sweeps and more accurate results from a room
search. The OPC-5000 can also store RF spectrum of many different
environments for future use.
|
 |
|
-
The Advanced DSP Correlation provides increased reliability for
automatically identifying eavesdropping devices. This provides
correlation on near silent rooms. An example of a near silent room
is one that has only air conditioning noise, typewriter, or sounds
from outside traffic. The preferred method is to create white noise
using the NGA-5000.
|
 |
- The audio level screen provides a graphic representation of the
actual audio being sampled and correlated. The Audio Frequency
Spectrum graph represents the audio frequency spectrum of the
sampled audio. The Correlation Result graph represents the
correlation results on "1" through "5" scale.
The Advanced DSP Correlation also provides information on threat
range.
|
|
- Advanced DSP Triangulation and Ranging. The NGA-5000 is used for
both correlation and locating the treat using triangulation. To use
the triangulation system, the NGA-5000 is used to find three range
measurement positions. After each measurement is made, the
triangulation screen displays the location of the bug.
|
 |
|
Version 4.0
Research Electronics International announces that with the release of
the OSCOR version 4.0 program key, it has also released version 4.0 of
its OPC-5000 software. This package of software permits access to many
new features both directly on OSCOR and remotely through a PC computer
(Windows 9x, 2000). This new software provides a capability that has not
been previously realized in the counter-surveillance industry.
Features added by New Version 4.0
The ability to view multiple database files simultaneously. New cut
and paste operations allow signals to be copied between files.
Multiple signals or spans can be selected then edited, copied or
deleted in one step.
An alternate, compact layout of the console. This, in addition to
saving screen space, allows the user to copy the console graphic
(using Alt+Print Screen) into report documents.
Easier selection of Inputs, Bandwidth and Demodulators.
More color choices for the console display Remote squelch control
and speaker mute.
MDC-2100 Microwave Down Converter support.
Display and configuration of more OSCOR functions.
|
| |
| OPC-5000
Advantages |
| |
OSCOR Database Utilities:
Provides signal classification using international frequency band
allocations.
Provides the ability to generate customized signal classification
databases.
Provides the ability to generate Signal reports and Frequency spectrum
graphs.
Provides the ability to generate comparison plots of signal database
information. |
 |
|
- The OPC-5000 software interface allows for uploads, downloads, and
permanent storage of signal database information that is received
from the OSCOR.
- The OPC-5000 software has the ability to program the OSCOR for
automatic operation.
- With the OPC-5000 software, signal labeling using International
Frequency Bands expands the OSCOR’s capabilities.
- Customized reports and frequency spectrum graphs can be created
using the OPC-5000 Interface software.
- Signal database comparison reports and charts can be created from
stored databases and new OSCOR readouts.
|
|
Installation of PC to OSCOR interface.
All OSCOR's previously manufactured can accept this new capability
using the serial communication port in the connector tray. The only
addition to all previously sold OSCOR units will be a new program key.
|
| |
| Specifications |
| |
Recommended PC System:
- Pentium Computer
- 16 Meg of RAM
- Windows 95
- Estimated at least 13 Meg of Hard Drive
- For remote communications, the modems should be purchased by REI
to ensure that the OS can interface directly with the modem
|
|